Use the addresses in this memory area when the FP-I4C unit is used together with general-purpose input/output (GPIO) and LEDs.
Memory areas that cannot be written to are marked read-only.
Address |
Description |
Read-only |
---|---|---|
33088 (16#8140) |
Status of F1, F2 and all LEDs as 16-bit data. Bit 0: PWR LED, bit 1: CON LED, bit 2: USR LED, bit 3: MEM LED, bit 4: USB1 LED, bit 5: USB2 LED, bit 6: COM1 LED, bit 7: COM2 LED, bit 8: F1 input, bit 9: F2 input, bit 10: reset tact switch (top side, inside housing), bit 11: power failure |
✓ |
33089 (16#8141) |
Status PWR LED, 1: on, 0: off Turns on if the power supply is turned on. |
✓ |
33090 (16#8142) |
Status CON LED, 1: on, 0: off This LED can be used for any purpose. |
|
33091 (16#8143) |
Status USR LED, 1: on, 0: off This LED can be used for any purpose. |
|
33092 (16#8144) |
Status MEM LED, 1: on, 0: off Turns on when data is written to the USB flash drive. |
✓ |
33093 (16#8145) |
Status USB1 LED, 1: on, 0: off Turns on when a device is connected to USB port 1. |
✓ |
33094 (16#8146) |
Status USB2 LED, 1: on, 0: off Turns on when a device is connected to USB port 2. |
✓ |
33095 (16#8147) |
Status TX1 LED, 1: on, 0: off Blinks quickly when communication via COM1 RS232 is active. |
✓ |
33096 (16#8148) |
Status TX2 LED, 1: on, 0: off Blinks quickly when communication via COM2 RS232/RS485 is active. |
✓ |
33097 (16#8149) |
Status F1 input, 1: on, 0: off Normally closed (normal state: 1). To turn this input to TRUE, simply connect it to GND (G1). |
✓ |
33098 (16#814A) |
Status F2 input, 1: on, 0: off Normally closed (normal state: 1). To turn this input to TRUE, simply connect it to GND (G1). |
✓ |
33099 (16#814B) |
Status RESET (reset tact switch), 1: on, 0: off |
✓ |
33100 (16#814C) |
Status PFAIL (power failure), 1: on, 0: off |
✓ |
33104 (16#8150) |
Device start time stamp in seconds, first word This is a value in Control FPWIN Pro7's DATE_AND_TIME format (seconds since 1/1/2001). To convert the data into a UNIX time stamp (seconds since 1/1/1970), add 978307200 seconds. |
✓ |
33105 (16#8151) |
Device start time stamp in seconds, second word |
✓ |
33106 (16#8152) |
Reserved. |
|
33107 (16#8153) |
Reserved. |
|
33108 (16#8154) |
Device shutdown time stamp in seconds, first word This is a value in Control FPWIN Pro7's DATE_AND_TIME format (seconds since 1/1/2001). To convert the data into a UNIX time stamp (seconds since 1/1/1970), add 978307200 seconds. |
✓ |
33109 (16#8155) |
Device shutdown time stamp in seconds, second word |
✓ |
33110 (16#8156) |
Reserved. |
|
33111 (16#8157) |
Reserved. |
|
33112 (16#8158) |
Device start before last time stamp in seconds, first word This is a value in Control FPWIN Pro7's DATE_AND_TIME format (seconds since 1/1/2001). To convert the data into a UNIX time stamp (seconds since 1/1/1970), add 978307200 seconds. |
✓ |
33113 (16#8159) |
Device start before last time stamp in seconds, second word |
✓ |
33114 (16#815A) |
Reserved. |
|
33115 (16#815B) |
Reserved. |
|
33116 (16#815C) |
Device shutdown before last time stamp in seconds, first word This is a value in Control FPWIN Pro7's DATE_AND_TIME format (seconds since 1/1/2001). To convert the data into a UNIX time stamp (seconds since 1/1/1970), add 978307200 seconds. |
✓ |
33117 (16#815D) |
Device shutdown before last time stamp in seconds, second word |
✓ |
33118 (16#815E) |
Reserved. |
|
33119 (16#815F) |
Reserved. |
|
33120 (16#8160) |
Device temperature (inside CPU) in 0.1°C |
✓ |