F177_PulseOutput_Home_Type1_DUT

This DUT can be used with the following instruction(s): F177_PulseOutput_Home

Elements of the DUT (identifiers):

dwControlCode: Control code [hex constant]

Specify the control code using a hexadecimal constant. Example: 16#1025. 1, 0, 2, and 5 are the values corresponding to digits 3, 2, 1, and 0 of the hexadecimal constant. Digit 0 is the digit on the far right.Additional digits specific for the selected control method are set automatically by the compiler shortly before the instruction is called.

Digit	Value	Setting
1	Movement direction
	0	Forward
	1	Reverse
0	Pulse output method
	0	CW/CCW Control is carried out using two pulses: a positive or clockwise rotation pulse (CW) and a negative or counterclockwise rotation pulse (CCW pulse).
	1	Pulse/direction Control is carried out using one pulse output to specify the speed and another to specify the direction of rotation with TRUE/FALSE signals. (Forward FALSE: In this mode, forward rotation is carried out when the rotation direction signal is FALSE.)
	2	Pulse/direction Control is carried out using one pulse output to specify the speed and another to specify the direction of rotation with TRUE/FALSE signals. (Forward TRUE: In this mode, forward rotation is carried out when the rotation direction signal is TRUE.)

The following outputs are TRUE or FALSE depending on the selected movement direction:

Pulse output method		Pulse output	Target value
			Positive value	Negative value
CW/CCW		CW	TRUE	FALSE
		CCW	FALSE	TRUE
Pulse/direction	Forward FALSE	Pulse	TRUE	TRUE
		Direction	FALSE	TRUE
	Forward TRUE	Pulse	TRUE	TRUE
		Direction	TRUE	FALSE
Count mode			Incremental counting	Decremental counting

diInitialSpeed: Initial speed [Hz]

1Hz–50000Hz

• For 1Hz £ Fmin < 46Hz: a maximum speed of 10kHz is possible (speed error larger with higher frequencies)
• For 46Hz £ Fmin < 184Hz: a maximum speed of 50kHz is possible
• For 184Hz £ Fmin: a maximum speed of 50kHz is possible (smallest speed error around 50kHz)

diTargetSpeed: Target speed [Hz]

1Hz–50000Hz

diAccelerationTime: Acceleration time [ms]

1ms–32760ms

The difference between target speed and initial speed determines the slope of the acceleration ramp.

diDecelerationTime:Deceleration time [ms]

1ms–32760ms

The difference between target speed and creep speed determines the slope of the deceleration ramp.

diCreepSpeed: Creep speed [ms]

1Hz–50000Hz

diDeviationCounterClearSignalOutputTime: Deviation counter clear signal [ms]

1ms–100ms [0–200] (in steps of 0.5ms).

Specify 0 when not using this signal.