Use an SD card to transfer the operation recording configuration to a PLC if the PLC is not connected to a PC with Control FPWIN Pro7 installed.
Depending on the method you choose, the operation recording configuration is stored in the PLC's ROM, where it will remain until it is deleted or overwritten, or in the internal RAM, where it will remain as long as the power supply is not turned off or a new configuration is loaded.
- Save the configuration file on an SD card with
Store the configuration file ALMGNT.FP7 in the folder \AUTO on the SD card.
- To start transferring the configuration file from the SD card to the PLC, insert the SD card into the PLC and do one of the following:
Press the COPY switch on the PLC. This method will store the configuration in the PLC's ROM.
Open the cover of the PLC and change the switch ROM to CARD. This method will store the configuration in the PLC's RAM.
- To copy the operation recording configuration from the PLC's ROM to the RAM, do one of the following:
- Turn the PLC's power supply on.
- Switch the PLC from PROG mode to RUN mode.